It appears you have not yet registered with DEVPPL. To register please click here... (it's fast, easy and free!)

Forum

Log In Sponsors
Board index Hardware Cooling and Overclocking Forum

cpu

cpu

Postby GoDs^GifT on Mon Sep 27, 2004 3:50 pm

Hey my cpu averages at 35 degrees celsuis and i was just wandering if it would be safe to overclock it or if i need to get a better heatsink i hav got a Athlon XP2000 ty for help
User avatar
GoDs^GifT
100+ Club
 
Posts: 111
Joined: Sun Sep 12, 2004 4:20 pm
Location: UK

Postby Malcolm on Sat Oct 09, 2004 2:54 am

CPUs are safe as long as they're running at less then 65C, thats the breaking point.

If you're going to overclock go slowly, keep testing your new settings with a high stress game (Doom3) or application (3D studio max) and check your temp during those tests.
User avatar
Malcolm
100+ Club
 
Posts: 198
Joined: Thu Oct 07, 2004 9:53 pm
Location: Ontario, Canada

Postby webmaster on Sat Oct 09, 2004 6:50 am

Do you have a setting in your BIOS called Shutdown temp? If you have, set it at 70 degrees celsius. And if you have a warning temp, set it to 65 degrees. They could get very warm if you overclock them =)
Make sure to check out our TNX Review and Link Vault Review
User avatar
webmaster
Site Admin
 
Posts: 2695
Joined: Tue Aug 17, 2004 1:07 pm
Location: Sweden

Postby ReFredzRate on Sat Oct 09, 2004 7:27 am

For an AMD cpu the breaking point is a bit higher Malcolm. It is pretty safe to have an AMD running at 60 Celsius, as long as it doesn't get higher.

GoD2^GifT: Be sure to adapt your cooling to the speeds you are running at. Overclocking means faster speeds, leading to more heat, leading to one hot pile of metal on your desk. Be sure to have some fans that can blow away the heat, and others to suck in the cold air.

Good luck!
ReFredzRate
1000+ Club
 

Postby GoDs^GifT on Sun Oct 10, 2004 11:12 am

hey i hadnt realised someone had replied to this post its so old lol ty for the advice but ive already found a web site with details instructions etc :D
Image
User avatar
GoDs^GifT
100+ Club
 
Posts: 111
Joined: Sun Sep 12, 2004 4:20 pm
Location: UK

Postby nighthawk on Thu Jul 06, 2006 9:33 pm

Malcolm wrote:CPUs are safe as long as they're running at less then 65C, thats the breaking point.



I thought that CPU can go up to 100 degrees C, and they should shut down automaticaly if they overheat.
My friend's Athlon is constanly over 80 degrees (he can't touch case) and he doesn't have any problems, although his PC is 3-4 years old
User avatar
nighthawk
250+ Club
 
Posts: 420
Joined: Sun Jun 11, 2006 1:53 pm
Location: SFRJ

Postby webmaster on Fri Jul 07, 2006 8:29 am

AMD Athlon was a very warm CPU.

If the computer shuts down or not when it's hot is not about the CPU, it's the motherbord. Some motherboards have functions that shuts down if the CPU temp gets too high. I think maybe 80 degrees C is maximum, if it goes any higher, the CPU could be damaged.
Make sure to check out our TNX Review and Link Vault Review
User avatar
webmaster
Site Admin
 
Posts: 2695
Joined: Tue Aug 17, 2004 1:07 pm
Location: Sweden

Postby johneva on Fri Jul 07, 2006 12:46 pm

Even at that temp your gonna slowly cook it over time generally CPUs take time to get cooked anyways unless you go wild with your settings and just blow it straight off.

As advised before 60-65c is top safe temp and thats whilst running a stress test such as Prime 95 which will run your system at full load for as long as needed to make sure your system is stable you should run this for about an hour at least. Also if you have a dual core CPU you will need to run two instances of Prime 95 to have each core at full load.

New AMD procs should not be run this hot though !

My Intel 950 is running at 59-60c whilst running two instances of Prime 95 for an hour.

Graphics cards though can run much hotter mine is getting upto 90c under full load but I would not advise going much higher.
Image
Only God Can Judge Me.
User avatar
johneva
500+ Club
 
Posts: 565
Joined: Sat Oct 29, 2005 1:16 pm
Location: Stafford, England


Who is online

Users browsing this forum: No registered users and 0 guests